Best answer: How much does it cost to wax a gym floor?

How much does gym floor refinishing cost? The average price for gym floor refinishing is between $2.00 and $3.00 per square foot, depending on the cost factors listed below.

How much should I charge to wax a floor?

Strip & Wax Floor Prices

HomeWyse states that average cost to strip and wax a floor is about $174. The lowest cost you could expect to pay is about $148 while the highest cost is about $200. This cost estimate is based on a 314 sq ft room. This makes the average cost of stripping and waxing a floor at $1.80 per sq ft.

How much does a gym floor cost?


Modular and rubber flooring will run about $5.50 and $9 per square foot, respectively. A poured urethane floor costs approximately $8 per square foot.

How do you calculate stripping and waxing floors?

Example – Strip and Wax 10,000sf VCT

  1. Cost of stripper (10,000 sq ft / 1,000 sq ft per gallon = 10 gallons x $15 = ($150) = 1.5 cents per square foot.
  2. Cost of finish (5 coats x 10,000 sq ft / 2000 sq ft per gallon = 25 gallons x $14ea = $350) = $.035 cents per square foot ($350)
  3. Cost of pads, mops, etc. (
IT IS INTERESTING:  Where can a 15 year old go to the gym?

26 дек. 2017 г.

How many coats of wax should you put on a floor?

Most wax finishes, like our Optimal Wet Look Floor Finish will cover approximately 2,000 square feet per gallon. Each finish is different, but most recommend 4 to 5 coats. For example, 1 gallon of Optimal would provide 5 coats on a 20′ x 20′ (400 ft²) room.

How long does it take to strip a wax floor?

It will probably take a few strips to fully remove the wax build up. I would apply some stripper on the area and wait 10 minutes to allow the stripper to bite into the wax. Then, I would use a scraper blade to remove the top layer of old wax.

How long does a gym floor last?

After a year of wear and tear, a typical gym floor will need a recoat. Once every 10 years or so, the floor should be sanded down to bare wood, lines are re-painted, it is re-sealed and re-coated.

What is the best floor for home gym?

Best Home Gym Flooring Options

  • Rubber Gym Flooring. Rubber is the premier gym flooring option. …
  • Foam Gym Flooring. For the lightest and most affordable home gym flooring, soft foam tiles are where it’s at. …
  • Carpet Tile Gym Flooring. …
  • Turf Gym Flooring. …
  • Soft PVC Vinyl Gym Floor Tiles.

Which flooring is best for gym?

Rubber, foam, carpet, vinyl, and turf are the most popular flooring options for home gyms. Rubber is the most common because it’s relatively affordable, durable, easy to clean, and versatile.

How often should floors be stripped and waxed?

Floors should be stripped and waxed on a regular basis in order to prevent damages from developing. Floors should be stripped biweekly, monthly or bimonthly depending on the amount of traffic your building receives.

IT IS INTERESTING:  Quick Answer: Can you do push ups on Bowflex dumbbells?

What color pad is used for stripping?

Stripping Pads

They are very aggressive and abrasive and should be used with low speed machines. Black is the standard color for stripping pads but other common colors are purple and brown.

How much does it cost to strip and wax a floor per square foot?

Strip and wax jobs are charged by the square foot. The price you charge your client can vary due to several factors, but the national average is 30 to 60 cents per square foot. However, some jobs can go up to 90 cents or more depending on how difficult the job is.

Can you mop a gym floor?

Mopping — whether wet or dry — can be a very effective way to extend the life of the floor if done daily. Regularly tending to floors will help eliminate the dust and dirt particles that often get ground into the floors finish. A simple once-over with a microfiber or flat mop on a regular basis is all that’s needed.

What do they put on gym floors?

Oil-based gym floor finish

Traditional appeal — This type of finish will give you a traditional appearance because it’s been used on so many floors for so many years. As of right now, the simple fact is that oil-based polyurethane finishes are the industry standard, especially when it comes to gym floors.

Can you buff a gym floor?

A slow speed (175 rpm) floor machine works well to buff out a gym floor. Usually a red pad with a wood floor polish does the best job. Before buffing, dust mop, then use a slightly damp flat mop to remove any spills.

IT IS INTERESTING:  Best answer: How do bodybuilders get shredded?
Be first